| After-sales Service: | Video Technical/Online Support |
|---|---|
| Warranty: | 5 Years |
| Function: | Heat Pressure Vessel |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Aerospace Epoxy Industrial Prepreg Oven Carbon Fiber Composite Autoclave For Auto Parts
1. One of the main advantages of composite autoclaves is that they are suitable for the production of a variety of materials, as long as the curing cycle, pressure, and temperature are within the limits of the autoclave composite materials can be produced.
2. Another advantage of autoclaves is their high-pressure flexibility for composite parts. Usually, the parts are laid on one side of the mold and then placed in a vacuum bag. Pressure is applied to the parts so that they are pressed against the mold. The pressure on the parts is further strengthened by vacuuming in the bag.
3. Therefore, the autoclave forming technology can produce composite parts with different shapes. Because of the above advantages, autoclaves are widely used in the production of advanced composite materials for aerospace.
| MODE | WORK DIAMETER | WORK LENGTH | MAX.TEMP | MAX.PRE | RATE.TEMP | RATE, PRE | CONTROL |
| DN0610 | 600MM | 1000MM | 160ºC | 0.6MPA | 3ºC/MIN | 0.1MPA/MIN | PLC+PID |
| DN1530 | 1500MM | 3000MM | 200ºC | 1.2MPA | 3ºC/MIN | 0.1MPA/MIN | PLC+PID |
| DN3050 | 3000MM | 5000MM | 250ºC | 1.8MPA | 3ºC/MIN | 0.1MPA/MIN | PLC+PID |
1. Composite Autoclaves can be divided into composite autoclaves, vacuum autoclaves, carbon fiber autoclaves, high-temperature and high-pressure autoclaves, aerospace autoclaves, sporting goods autoclaves, auto autoclaves, experimental autoclaves, and so on.
Autoclave molding is a single-sided mold, using the vacuum bag sealed after the negative pressure to pressurize the product, and finally curing molding. The process is as follows: prepare the mold and apply the release agent - lay the reinforcement material - lay the release cloth - lay the pipeline and rubber strip - lay the vacuum bag sealing - curing - release the mold.
The advantages of this molding method are low cost, high material utilization rate, wide application range, stable and reliable process. The disadvantage is that the temperature control accuracy is poor, and the need to increase the molding auxiliary equipment and auxiliary materials. For example, carbon fiber robotic arms, carbon fiber helmets, etc., can be formed by autoclave.
1.We will deliver your composite autoclave by LCL/20'FCL/40'FCL depending on your order.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}