Product Description
Electric Heating High Pressure High Temperature Water Spray Retort Sterilizer
The spray sterilization retort is to inject a small amount of process water, to reach a predetermined position (can not immerse the product) through the efficient circulation pump - filter - efficient heat exchanger water into the spray pipe, and then through the spray nozzle to spray the hot water atomized to the surface of the food, the heat distribution in the pot uniform, no sterilization dead Angle. Water is heated and cooled through the heat exchanger, and the heating and cooling speed is rapid, which can efficiently, comprehensively and stably sterilize the product.
Characteristics of Retort Sterilizer
1, indirect heating and indirect cooling, cooling water and process water is not in contact, avoiding the secondary pollution of food, no need for water treatment chemicals. High temperature sterilization for short time.
2, reduce steam consumption, steam atomization after the sterilization water is directly mixed in the sterilization kettle, improve the speed of heating and cooling.
3, low noise, to create a quiet and comfortable working environment.
4, water jet from different angles, steam, air and water mixed convection, forming a perfect temperature distribution.
5, a small amount of process water fast cycle, quickly reach the predetermined sterilization temperature.
6, the kettle is equipped with four movable temperature sensor probes, which can monitor the F value of the food center at any time, the heat distribution in the kettle, and understand the heat penetration at any time (the time when the temperature reaches the geometric center of the food from the food surface).
7, perfect pressure control, the pressure of the entire production process is constantly adjusted to adapt to the changes in the internal pressure of the product packaging, so that the deformation of the product packaging is minimum, especially suitable for gas-containing packaging products.
8, the process water preheating system can ensure that the heat preservation, heat filling products get continuous heating process.
9, sterilization water using softened water to avoid process water quality problems caused by the outer packaging point without dirt.
10, steam sterilization function
11, save installation space, easy to operate, save manpower (only need to use the control cabinet direct operation).
12, suitable for beverage and other food industry, automatic loading and unloading of mass production. More convenient for the future of the industry unmanned workshop automatic configuration equipment.
| Model |
PLJ10-1B |
PLJ10-2B |
PLJ12-2B |
PLJ12-3B |
PLJ12-3.6B |
PLJ14-3B |
| Inner diameter(mm) |
1000 |
1000 |
1200 |
1200 |
1200 |
1300 |
| Length(mm) |
950 |
1900 |
1900 |
2870 |
3820 |
4000 |
| Capacity(m3) |
1.00 |
1.80 |
2.60 |
3.70 |
4.06 |
5.62 |
| Pot thickness(mm) |
4 |
4 |
5 |
5 |
5 |
5 |
| Max working temperature(ºC) |
147 |
147 |
147 |
147 |
147 |
145 |
| Weight(kg) |
560 |
650 |
860 |
1200 |
1300 |
3320 |
| Voltage(V) |
380 |
380 |
380 |
380 |
380 |
380 |
Automatic retort for various types of high temperature packaging materials:
1. Glass containers: glass jars.
2. Metal containers: tin cans.
3. Aluminum can plastic container: PP bottle, HDPE bottle.
4. Soft bag packaging: aluminum foil bag, transparent bag, vacuum bag, high temperature cooking bag and so on.
The use of retort sterilizer to sterilize food and beverage can effectively extend the shelf life of products, it is widely used to sterilize milk or juice, porridge, chicken and duck products, braised meat, pork trotters, dried beans, sausages, fruit jams, braised eggs, and other products.
Company Profile
FAQ
1. DO YOU HAVE OEM,ODM SERVICE?
Yes, we have OEM,ODM service, besides low MOQ.
2. WHAT ARE YOUR TERMS OF DELIVERY?
We accept EXW, FOB, CIF etc. You can choose the one which is the most convenient or cost effective for you.
3. WHAT ABOUT THE LEAD TIME FOR MASS PRODUCTION?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, the production lead time is within 10-15days, however, we suggest that you start inquiry two months before the date you would like to get the products at your country.
4. WHEN CAN I GET THE PRICE AND HOW TO GET THE FULL PRICE?
If your information is enough, we will quote for you in 30mins-1 hour on working time, and quote in 12 hours on off-work time. Full price base on type, size, material, thickness, and quantity. We welcome your inquiry. If you are very urgent to get the price, please tell us in your email so that we will deal with your inquiry priority.
5. ARE YOU A MANUFACTURER OF AUTOCLAVE?
Yes, we are the autoclave and food retort manufacturer and we have our own factory which is loated in Zhucheng city, Shandong province.
){kind=link}